Given below is a car stereo amplifier circuit using audio amplifier IC – TDA2040
Car Audio Amplifier Circuit:
Description of the circuit:
A car stereo amplifier circuit using
TDA2040 is shown here. TDA2040 is a monolithic integrated audio
amplifier that operates in Class AB mode. The IC has built in circuitry
for short circuit protection and thermal shut down and more over it can
be operated from a single supply too. The amplifier can deliver 12 watts
into to a 8 ohm speaker.
In the circuit the IC is wired in order
to operate from the cars 12V line. Capacitor C7 is the input DC
decoupling capacitor and R4 provides feedback. Network consisting of
resistor R5 and capacitor C5 provides high frequency stability and
prevents any chance of oscillation. Capacitor C6 couples the ICs output
to the speaker. C2 and C1 are power supply filters.
Circuit diagram of car stereo circuit using TDA2040
Notes:
-
Quality of the PCB is a very crucial factor in the amplifiers performance.
-
The amplifier can be operated from cars 12V line.
-
Heat sink is necessary for TDA2040.
-
All electrolytic capacitors must be rated 15V.
-
Only one channel is shown here. For stereo application you must make one more identical copy.